Marsh TD2100 Series
TDH
An American made manual gummed tape dispenser built on the same platform as the new electronic model. Each handle pull dispenses up to 36" of tape. Single brush moistening. Optional heater available to increase efficiency in moistening gummed tapes.
Replaces the Marsh 5HT:
Features:
- All new "Apex" design guillotine style cutter. Made of 420HC Stainless Steel.
- 70oz Water Bottle increases production "Up Time" with fewer refills. Largest bottle in the industry with a rubber valve that reduces water spillage.
- 12 gauge, all metal chassis construction, powder coated industrial gray.
- NEW wide track feeding! The 1.5" feed roll and pinch roll uses a high coefficient friction urethane to ensure accurate and quiet tape feeding.
- Built-in all metal adjustable tape channel guides. All metal construction, easy to adjust with built-in thumbscrew feature for centering the roll of tape. "Open Basket" design offers a quick view of remaining tape roll and easy drop-in reloading.
- Accommodates up to 1000' (305 meter) tape roll max diameter is 9" (222.6mm).
- 1 1/2" up to 3" width tape.
- Standard 18 month limited warranty.
- Models with heaters are Certified to CE and to UL.
Made in USA
Click here for the owners/operator parts manual in pdf format.
MSSC also offer a repair manual that is indepth with 65 pages in pdf format. Click here.
Click here for a picture parts list.
Specs:
Tape: Paper or Reinforced Kraft
Gummed Tape
Tape Widths: 1" (2.5 cm) to 3" (76.2 cm)
Tape Lengths: 4" to 99" depending upon model.
Heater
Electrical: 115 volts, 50/60 hertz or
220 volts, 50/60 hertz
Heater
Amperage: 4 amps for 110/120v
2 amps for 220/240v
Heater Power Cord: 7
feet (2.3m) non-detachable
Water Bottle: 70 ounces (2070 ml)
Shipping Weight: 34 pounds (12.7 kg)
Dimensions: 18.9" long x 13.7" high x 10.5" wide (48 cm long x 34.8 cm high
x 26.6 cm wide)
Marsh offers single brush moistening with a new style guillotine type cutting blades and tank type heater (Standard on the electronic - Optional on the manual).
Blade maintenance is required when using the heavier tapes and in some instances can interfere with productivity. On the newer 2100 style machines you will need to remove the blade guard to clean and oil the blade. On the older machines the scissor blades are held in place with only two screws, it will take approximately five minutes to remove and clean. At Pro Pack we do not recommend spray type cleaners or spray oils on this machine due to the possibility of over spray on the moistening brush. The blades are cleaned with a solvent type fluid (lighter fluid works great) and coated with a thin film of oil that will prevent build up of gummed materials.
With single brush moistening it is also very important to keep the brush clean weekly with soap and water. Use of dish wash detergent works best as hand soaps can contain hand softeners which will interfere with the moistening characteristics.